Electrofusion (EF) Fittings

Electrofusion EF Coupler

EF Couplers are are an integral part of every PE installation; It’s strength is as good as butt fusion welding and its use can often be advantageous. Some of these couplers are available up to 25Bar strength.

Dimensions: OD 20mm – 800mm

SDR: SDR11 SDR17 (SDR9/7.4)

Electrofusion EF Coupler PN10/SDR17

EF Couplers are are an integral part of every PE installation; It’s strength is as good as butt fusion welding and its use can often be advantageous. For connecting water/sewer pipes with maximum working pressure of 10bar.

Dimensions: OD 110mm – 630mm

SDR: SDR17-33

Electrofusion EF Sewage Inspection Chamber Adapter

Sewage Inspection Chamber Adapter ASF as joining element between concrete inspection chamber and FRIAFIT-Sewage Insert Sleeve (AEM).

Dimensions: OD 110mm – 630mm

SDR: 0.5bar

Electrofusion EF Sewage Insert Sleeve AEM

Sewage Insert Sleeve AEM for jointing HDPE pipes to concrete inspection chambers in conjunction with FRIAFIT-Inspection Chamber Adapters.

Dimensions: OD 110mm – 630mm

SDR: SDR11-33

Electrofusion (EF) 45/90 Degree

The Electro Fusion (EF) Elbow is used for all changes of direction in the HDPE pipe system. Available in 45 Degree, 90 Degree, and in some cases 30 Degree.

Dimensions: OD 32mm – 225mm

SDR: SDR11 (PN16)

Electrofusion (EF) Tee

The Electro Fusion (EF) Tee is used for all changes of direction in the HDPE pipe system where branching is required.

Dimensions: OD 32mm – 225mm

SDR: SDR11 (PN16)

Electrofusion (EF) Tapping Saddle

The Electro Fusion (EF) Pressure Tapping Tee is used for branches of unpressurised and pressurised pipelines. (Outlet from OD 20mm – 63mm depending on Mains diameter)

Dimensions: OD 40mm – 315mm

SDR: SDR11 (PN16)

Dimensions: OD 40mm – 355mm/400mm

SDR: SDR17 (PN10)

Electrofusion (EF) Spigot Saddle

Electro Fusion (EF) Spigot Saddles are used for tapping of depressurised gas – and waterpipes as well as for pressure drainage. Outlet spigot for use with EF couplers. (Branch Sizes from OD63mm – 160mm depending on Mains diameter). Please contact us with your requirements

Dimensions: OD63mm – 630mm (Mains)

SDR: SDR11 (PN16)

Electrofusion (EF) Reducer

The EF Reducer is applied for immediate reduction within the pipe system. Please contact us with your requirements

Dimensions: OD 160mm – 20mm

SDR: SDR11 (PN16)

Electrofusion (EF) Threaded Transition Fitting

ELectro Fusion (EF) Transition Fittings are threaded joints as an adaptor from a steel/brass pipe with internal or external thread to a HDPE pipe. Joint on the part of HDPE by EF Coupler. (0.5″ – 2.5″ BSP male & female threaded outlet) Please contact us for full details.

Dimensions: OD 32mm – 63mm (with varying Threaded Outlets)

SDR: SDR11 (PN16)

Electrofusion (EF) End Cap

The Electro Fusion (EF) End Cap is used to shut off or blank outlets in the HDPE pipe system.

Dimensions: OD 20mm – 225mm

SDR: SDR11 (PN16)