PE Pipe
egelen®
The egeplast egelen® pipe is a standard pressure pipe manufactured from high-density polyethylene (PE 100, optionally PE 80). The long service life of 100 years, great flexibility and light weight are the quality characteristics of this pipe.
Dimensions: OD 16 mm – OD 1200 mm
SDR: SDR 26 – SDR 7,4
Standards: BS EN 12201, EN 12201-2, EN 13244, DIN 8074, DIN 8075, WIS 4.32.17, EN 1555-2
Quality: With DVGW registration number for gas and drinking water, with DIN-Certco test mark for sewage.
Certifications: DVGW, KIWA, DS, SVGW, ÖVGW, SIS, DIN-Gost, Belgaqua, WIS, DWI, KIWA-Gas, IGNG, VUSAPL-NITRA
Delivery: 12m or 13.4m sticks, 100m Coils up to OD110mm
Request more information
egeplast SLA® 2.0
The egeplast SLA® 2.0 safety pipe is the only plastic drinking water pipe in the world officially approved for installation in contaminated soil. A diffusion-resistant aluminium barrier layer between the outer coating and the inner PE pipe reliably prevents the ingress of pollutants. One interesting option is the installation of drinking water pipes and sewage pipes in a combined line!
Dimensions: OD 25 mm – OD 630 mm
SDR: SDR 17 – SDR 7,4
Standards: prEN 1555-2, prEN 12201-2, DIN 8074, DIN 8075, BRL-K-545/01, BRL-K-533/03, GW 335 T2
Quality: With DVGW registration number for gas and drinking water
Certifications: DVGW, KIWA
Delivery: Sticks, Coils on request
Request more information
egeplast 9010®
The egeplast 9010® pipe is a pressure pipe manufactured from PE 100 RCplus (Resistance to Crack) with maximum resistance to creeping crack propagation. A 10% coloured outer layer is isometrically integrated to allow a precise evaluation of conformity with the max. damage of the pipe surface pursuant to the valid rules and regulations (e.g. DVS, DVGW, KRV). Particularly suitable for trench-based installation without sand bedding, as well as ploughing and milling installation.
Dimensions: OD 25 mm – OD 630 mm
SDR: SDR 11, (SDR17 greater than OD90mm)
Standards: DIN EN 1555-2, DIN EN 12201-2, DIN EN 13244, DIN 8074, DIN 8075, GW 335 T2, WIS
Quality: With DVGW registration number for gas and drinking water
Certifications: DVGW and WIS
Delivery: Coils and sticks
Request more information
egeplast SLM® 2.0
Trenchless installation techniques place higher demands on the pipe material: the pressure-bearing pipe wall is manufactured from modern PE 100 RCplus (Resistance to Crack) materials, and this pipe also has an extremely "hard" outer shell to protect it from scratches and scoring. Essential for black-box installation and therefore recommended by DVGW for controlled drilling in its current directive GW 321!
Dimensions: OD 25 mm – OD 1200 mm
SDR: SDR 17 – SDR 7,4
Standards: DIN EN 1555-2, DIN EN 12201-2, DIN EN 13244, DIN 8074, DIN 8075, ÖNORM B 5172, ÖVGW B 5192, GW 335 T2, WIS
Quality: With DVGW registration number for gas and drinking water, with DIN-Certco test mark for sewage
Certifications: DVGW, SVGW, ÖVGW, DIN-Gost, IGNG, DWI, WIS
Delivery: Coils and sticks
Request more information
egeplast SLM® 2.0 DCT
Use of an integrated spirally wound conducting strip further enhances the already outstanding properties of the egeplast SLM® pipe. Not only does this enable the egeplast SLM® 2.0 DCT to be exactly located, but it also provides proof of non-damage to the pipe after laying for acceptance of the work. This option gives both the customer and contractor maximum reliability, even under the most unfavourable soil conditions.
Dimensions: OD 25 mm – OD 1200 mm
SDR: SDR 17 – SDR 7,4
Standards: DIN EN 1555-2, DIN EN 12201-2, DIN EN 13244, DIN 8074, DIN 8075, ÖNORM B 5172, ÖNORM B 5192, GW 335 T2, WIS
Quality: With DVGW registration number for gas and drinking water, with DIN-Certco test mark for sewage, WIS
Certifications: DVGW, SVGW, ÖVGW, DIN-Gost, IGNG, DWI, WIS
Delivery: Coils and sticks
Request more information
egeplast 3L/SLA®
In addition to diffusion resistance, the egeplast 3L/SLA® pipe also provides the option of permanent leakage monitoring and leak localisation to an accuracy of 10 cm. It is the only pipe system that fulfils the requirements on permanent leakage monitoring pursuant to ATV A 142 for Class II Water Protection Zones.
Dimensions: OD 25 mm – OD 1200 mm
SDR: SDR 17 – SDR 7,4
Standards: DIN EN 1555-2, DIN EN 12201-2, DIN EN 13244, DIN 8074, DIN 8075, GW 335 T2
Quality: With DVGW registration number for gas and drinking water, with DIN-Certco test mark for sewage, WIS
Certifications: DVGW, WIS
Delivery: Sticks, Coils on request
Request more information