Electrofusion EF Fittings
Contact Us
SALES: 051 844922
HIRE: 051 306910
Electrofusion
An extensive range of electrofusion fittings
egeplast Ireland Ltd. holds significant stocks of electrofusion EF fittings for use in the water, sewer, and gas industries.
Full EF Fittings Range 2021Electrofusion EF Coupler
Slide over couplers, SDR11, SDR17, SDR9
EF Couplers are are an integral part of every PE installation; It’s strength is as good as butt fusion welding and its use can often be advantageous. Some of these couplers are available up to 25Bar strength. With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With separate fusion zone and one indicator per fusion zone for visual fusion control.
Product Summary
Dimensions: OD 20mm – 800mm
SDR: SDR11 SDR17 (SDR9/7.4)
Documentation
Certification
Electrofusion EF Coupler SDR17
Slide over couplers SDR17
EF Couplers are are an integral part of every PE installation; It’s strength is as good as butt fusion welding and its use can often be advantageous. For connecting water/sewer pipes with maximum working pressure of 10bar.
Product Summary
Dimensions: OD 110mm – 630mm
SDR: SDR17
Documentation
Certification
Electrofusion AM Coupler
Slide over couplers SDR17
EF Couplers are are an integral part of every PE installation; It’s strength is as good as butt fusion welding and its use can often be advantageous. For connecting water/sewer pipes with maximum working pressure of 10bar.
Product Summary
Dimensions: OD 110mm – 630mm
SDR: SDR17
Electrofusion EF Coupler SDR7.4
Slide over couplers SDR7.4
With exposed heating coils for optimal heat transfer, large insertion depth,
wide fusion zones plus cold zones at the end and in the middle to prevent
the flow of molten material, for use without holding devices. Processing
range SDR 11 – SDR 7.4.
Product Summary
Dimensions: OD 90mm – 355mm
SDR: SDR7.4
Documentation
Certification
Electrofusion EF Coupler SDR11
Slide over couplers SDR11
With exposed heating coils for optimal heat transfer, large insertion depth,
wide fusion zones plus cold zones at the end and in the middle to prevent
the flow of molten material, for use without holding devices. With separate
fusion zone and one indicator per fusion zone for visual fusion control.
With pre-heating technology (d 400 – d 450 optional use; d 500 – d 900
required).
Product Summary
Dimensions: OD 16mm – 800mm
SDR: SDR11
Documentation
Certification
Conical ring Coupler
Conical ring Couplers SDR17
Easy and quick assembly, also as slide over coupler and given limited
space. Variable diameter range to bridge large tolerance conditions of the
outer pipe diameter and out-of-roundness. With flexible fusion conical ring
for easy assembly given pronounced pipe out-of-roundness. The installation
is made without fixing device and rounding clamp. Mechanical minimisation
of the joint gap thanks to flex ring system. Integrated tensioning device for
assembly and gap minimisation. Exposed, fixed heating coil, for optimal heat
transfer during fusion, broad fusion zones as well as melt flow-inhibiting cold
zones at the fronts and the centre for improved pipe guidance and
prevention of melt release.
Product Summary
Dimensions: OD 355mm – 1200mm
SDR: SDR17
Documentation
Certification
Spigot Saddle SA UNI
Spigot Saddle SA UNI SDR 11
For integration of a branch line in PE pipelines –unpressurised or under
operating pressure. Compact fitting made of HD-PE. Saddle with exposed
heating element for optimal heat transfer. Outlet spigot for processing with
FRIALEN couplers MB or UB. Suitable for all pipe diameters in the given
range. Assembly with FRIATOOLS clamping unit UNITOP (see Product
Range FRIATOOLS). Tapping in unpressurised condition with FRIATOOLS
tapping kit FWAB XL (see Product Range FRIATOOLS). Pressure test of
saddles fusion is possible before tapping via integrated pressure nozzle and
pressure test adaptor FWDPA
Product Summary
Dimensions: OD 250mm – 280mm/
450mm – 900mm
SDR: SDR11
Spigot Saddle with flange outlet
SDR 11
Compact fitting in HD-PE. Manufactured combination of FRIALEN spigot
saddle, coupler and FRIALEN Full Faced Flanges EFL (compact flange).
Saddle with exposed heating coil for optimum heat transfer. Tapping in
pressure free condition or, using an additional shut-off valve, under operating
pressure by means of standard tapping equipment (we recommend Hütz &
Baumgarten (www.huetz-baumgarten.de)). We recommend steel-reinforced
elastomeric gaskets.
Additional washers are necessary for the flange reducer
Product Summary
Dimensions: OD110mm/80 – 225/100mm
SDR: SDR11
Documentation
Certification
Spigot Saddle SA XL
SDR 11
egeplast Ireland Ltd can supply Spigot Saddles SA XL suitable for EF welding.
Product Summary
Dimensions:
Mains: OD400mm – OD1200mm
Branch: 225mm – 400mm.
Details in documentation. All saddles are 16 bar water and 10 bar gas rated.
SDR: SDR11
Electrofusion EF Elbow
Electrofusion Elbow available in 11,30,45, and 90 degree variants*
The Electro Fusion (EF) Elbow is used for all changes of direction in the HDPE pipe system. Available in 45 Degree, 90 Degree, and in some cases 30 Degree.
Product Summary
Dimensions: OD 32mm – 225mm
SDR: SDR11
11 & 30 degree are only available in certain smaller sizes. Contact us for info
Electrofusion EF Tee
Electrofusion Tee with 2 separate welding zones
The Electro Fusion (EF) Tee is used for all changes of direction in the HDPE pipe system where branching is required. The EF Tee comes with 2 separate welding zones, one on the line, and one on the tee outlet.
Product Summary
Dimensions: OD 32mm – 225mm
SDR: SDR11
End Caps
SDR11
With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end to prevent the flow of molten material, for use without holding devices.
Product Summary
Dimensions: OD 20mm – 225mm
SDR: SDR11
Electrofusion EF Reducer
SDR11
With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices.
Product Summary
Dimensions: OD 20mm – 160mm
SDR: SDR11
Documentation
Certification
Pressure Tapping Tee with extra long Spigot
SDR11
With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices.
Product Summary
Dimensions: 40mm – 225mm
SDR: SDR11
Documentation
Certification
Pressure Tapping Tee Top-Loading and Top-Loading/Relining with extra long Spigot
SDR11
Suitable for all pipe diameters in the given range by means of the FRIALEN FRIATOP clamping unit (see Product Range FRIATOOLS). Leak free and swarfless tapping up to 10 bar (gas) or 16 bar (water). Integral drill with upper and lower stop, guided in a metal sleeve. With exposed heating element for optimal heat transfer. End plugs with internal O-ring seal. Fusible stack (d3 50 = K). Pressure test possible before tapping. For pressure test adapter and actuating key see Product Range FRIATOOLS. Length of the outlet spigots dimensioned for 2 fusion operations.
Product Summary
Dimensions: 250mm – 315mm (400mm)
SDR: SDR11
Documentation
Certification
Spigot Saddle
SDR11
Compact fitting in HD-PE, saddle with exposed heating element for optimal heat transfer and outlet spigot for use with FRIALEN-couplers MB or UB. Swarfless tapping in the depressurised state by means of commercial drilling units.
Product Summary
Dimensions: 63mm – 225mm
SDR: SDR11
Documentation
Certification
Spigot Saddle Top Loading
SDR11
Suitable for all pipe diameters in the given range by means of the FRIALENFRIATOP Clamping Unit (see Product Range FRIATOOLS). Compact fitting in HD-PE. Saddle with exposed heating element for optimal heat transfer and outlet spigot for use with FRIALEN-couplers MB or UB. Swarfless tapping in the depressurised state by means of commercial drilling units.
Product Summary
Dimensions: 250mm – 560mm
SDR: SDR11
T-piece with extra long spigot
SDR11
Straight connector with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Up to and including d63 extra long outlet spigot dimensioned for 2 fusion operations.
Product Summary
Dimensions: 20mm – 63mm
SDR: SDR11
Transitioning Fittings HD-PE/Steel with female thread
SDR11
Compact transition fitting. HD-PE end with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without holding devices. Steel end permanently anchored in the HD-PE. Self sealing patented sealing geometry without elastomer seal. For use in gas systems. Other thread sizes on request
Product Summary
Dimensions: 32mm – 63mm
SDR: SDR11
Transitioning Fittings HD-PE/Steel with male thread
SDR11
Compact transition fitting. HD-PE end with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without holding devices. Steel end permanently anchored in the HD-PE. Self sealing patented sealing geometry without elastomer seal. For use in gas systems.
Product Summary
Dimensions: 32mm – 63mm
SDR: SDR11
Transitioning Fittings HD-PE/Brass with male thread
SDR11
Compact transition fitting. HD-PE end with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without holding devices. Brass end permanently anchored in the HD-PE. Self sealing patented sealing geometry without elastomer seal. For use in water systems. Standard: Brass. Gunmetal on request Other thread sizes on request.
Product Summary
Dimensions: 32mm – 75mm
SDR: SDR11
Slide-over Couplers, SDR 9
SDR9
With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With separate fusion zone and one indicator per fusion zone for visual fusion control. With pre-heating technology (d 400 – d 450 optional use; d 500 – d 630 required).
Product Summary
Dimensions: 400mm – 630mm
SDR: SDR 9
Slide-over Couplers, SDR 17
SDR17
With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With separate fusion zones. UB d 1000 and above can only be fused with the FRIAMAT XL. From d 560 with pre-heating technology.
Product Summary
Dimensions: 315mm – 1200mm
SDR: SDR17
EF Tapping Tee
SDR 11
Kimplas Electrofusion Tapping Tees are manufactured in PE 100 (Black) material and are of SDR 11 rated (PN 16). For exact recommendations on compatibility, for welding with SDR 9 through SDR 21 or PN 6 through PN 16 pipe, refer Kimplas Technical Specifications Manual. Kimplas Electrofusion fittings are suitable for permanently connecting distribution MDPE 80 and PE 100 pipes, both in straight form as well as in coil form.
Product Summary
Dimensions: d63 – 2” – 75x32mm,
d90 – 3″ x32mm,
d110 – 4″ – 140x32mm,
d160 – 8″ – 213x32mm,
d225 – 250x32mm
SDR: SDR 11
FIXBLOC
Fixation for absorbing axial thrust and tensile forces
egeplast Ireland Ltd can supply EF welding FIXBLOCs with sheer laods up to 40kN.
Product Summary
Dimensions:
Pipe mains OD160mm up to OD1600mm
Features: You can weld as many as required onto the circumference of the mains to achieve axial thrust absorption requirement.